Top 50 Desktop Support Interview Questions and Answers
Here are Desktop support engineer interview questions and answers for fresher as well experienced candidates to get their dream job.
Desktop Support Engineer Interview Questions
1) What is active directory?
Active directory authorizes and authenticates all users and computers in a window domain network, ensuring the security of the computer and software. Through active directory various functions can be managed like creating admin users, connecting to printers or external hard drives.
Free PDF Download: Desktop Support Interview Questions & Answers
2) What is DHCP and what it is used for?
DHCP stands for dynamic host configuration protocol. It is used to allocate IP addresses to a large number of the computer system in a network. It helps in managing a large number of IP’s very easily.
3) What is the scope and super scope?
The scope consists of an IP address like gateway IP, subnet mask, DNS server IP. It can be used to communicate with the other PCs in the network. The superscope becomes when you combine two or more scopes together.
4) What is DNS?
DNS means Domain Naming Service, and it is used for resolving IP addresses to name and names to IP address. DNS is like a translator for computers, computers understand the number and not the alphabet. For example, if we type like hotmail.com, the computer doesn’t understand this, so they use DNS which converts (hotmail.com) into (numbers) and then executes the command.
5) What is forward and reverse lookup in DNS?
When we convert an IP address into names is called Reverse lookup, while converting names into IP address is called Forward lookup.
6) What is ‘A’ record and what is ‘MX record’?
‘A’ record is also known as host record, and it can map the IP address by name. It is with this record that DNS can find out the IP address of a name. While, ‘MX record’ also known as mail exchanger record, by the help of ‘MX’ record, location of the mail server is identified. The record is also found in DNS.
7) What is the IPCONFIG command?
IPCONFIG command is used to display the IP information of the computer assigned like DNS IP address and gateway IP address.
8) What would you use to connect two computers without using switches?
Cross cables are used to connect two computers without using switches.
9) What is a domain?
A domain is a set of computers which network recognizes by the internet. It can be used by centrally administer computers. It is created when you install active directory.
10) Tell me if your system is infected by a virus how you will recover the data?
You need to install another Hard Disk with the latest anti-virus software, and an O.S with latest patches. Before you start your system, connect the infected HDD as a secondary drive then scan and clean the infected hard drive. Once done, you can copy the files into the system.
11) What is the operating system?
Operating system acts as an interpreter between computer application and hardware. It works as a user interface.
12) What are the types of the operating system or O.S?
The two types of operating systems are:
- NOS: Network Operating System. Examples of NOS- Windows NT, 2000,2003
- SOS: Simple Operating System. Examples of SOS – Windows 95,98, ME
13) Explain about RAS server?
RAS means Remote Access Server. It allows operating the tool or information that typically resides on a network or IT devices through a combination of hardware and software, for example connecting to a printer or file. It is usually used for mobile users who are in the network. It uses a telephone line to provide connectivity to its users. It can also connect two or more than two offices in the network.
14) Explain about VPN server?
VPN means Virtual Private Network. It is a private communications network often used by companies or organizations to communicate confidentially over a public network. This is used by the mobile users in the network.
15) What is the difference between RAS and VPN server?
RAS is truly a local area connection between two connections whereas, VPN is a local connection spread over a large area.
16) What is IAS server?
IAS means Internet Authentication Service. For many types of network access like wireless, authenticating switch and remote access dial-up, they perform accounting and auditing, centralized connection authentication and authorization.
17) What is a Ping command?
Between two or more devices, to check the physical IP connectivity Ping command is used.
18) What do you mean by clustering? What are the benefits?
When one or more computers work together as a single system by sharing their resources is known as clustering. The benefits of clustering are that it reduces the load on one single system by sharing the load also it is used for redundancy of the services.
19) What is a group?
A Group is a collection of user accounts. It provides a simplified administration in the network.
20) What is the child domain?
A child domain is the member domain of Windows 2000 Active Directory.
21) What are the benefits of a child domain?
Benefits of the child domain are:
- Low network traffic
- Low administrative overhead
- Security boundary
22) What is OU?
OU means for Organizational Unit. It is a container within Active Directory which can hold users, groups, and computers. It is the smallest unit on which an administrator can assign group policy settings.
23) What is group policy?
Group policy provides streamlined access to all the users in the network. It can be used to define a user’s security and networking policies. By group policy, you can keep control over certain function like not allowing the users to shut down the system or using the control panel or running the command. Group policy is applicable to active directory containers like OU, site, and Domain.
24) What is the difference between permission, rights, and policy?
“Policy” is assigned on active directories, like the site, domain, and OU. The “Rights” are assigned to users and groups, whereas, the “Permission” is assigned for network resources like file, folders, and printers.
25) What do DC and ADC stand for?
DC stands for the Domain Controller, and ADC stands for Additional Domain Controller.
ADC is a backup of the domain controller. The domain controller is a server that checks the security measures like user id, password.
26) What is the difference between DC (Domain controller) and ADC ( Additional Domain Controller)?
There is one difference between the domain controller and additional domain controller, on DC all five operational roles are available while in ADC only three operational role is available.
27) What are the operational roles for DC (Domain controller) and ADC ( Additional Domain Controller)?
Operational roles for DC (Domain controller) are:
- Domain Naming Master
- Schema Master
- RID Master
- PDC Emulator
- Infrastructure Master
Operational roles for ADC (Additional Domain Controller) are:
- PDC Emulator
- RID Master
- Infrastructure Master
28) What is a “Default Gateway”?
The default gateway is the IP address of the router in the network. In any case, if the user wants to switch on to another network, or if they cannot locate their particular network than their query will be forwarded to the default gateway.
29) How can you take a backup of emails in MS Outlook?
To take a back-up in the ms outlook, you have to go in the control panel. In the control panel, you have to go under mail option and then open the data file, select personal folder and click on open folder. After that, you have to copy .pst and have to paste it wherever you want the backup.
30) What is the trusting domain and trusted domain?
In trusting domain resources are available, while in trusted domain user’s account is available.
31) What is the BUS speed?
The rate of communication speed between microprocessor and RAM is known as BUS speed.
32) Name the Active Directory Partitions?
There are three types of active directory partitions
- Schema partition
- Configuration partition
- Domain partition
33) What is Fixboot?
Fixboot writes a new partition boot sector on to the system partition.
34) How many logical drives is it possible to fit on to a physical disk?
The maximum number of the logical drive that can fit on a physical disk is 24, while the extended partition can only have 23 logical drives.
35) What is B Router?
BRouter means Bridge router. To provide communication between two or more different network like a computer to computer or computer to the internet, B Router is used.
36) What is the major difference you can mention about Gateway and Router?
Gateway works on different network architecture and router works on the same network architecture.
37) What is the packet?
A packet is a logical grouping of information that comprises a header which contains user data and location information.
38) What is SCSI?
SCSI stands for Small Computer System Interface. It is a standard electronic interface that allows personal computers to communicate with peripheral hardware such as disk drives, tape drives, printers, CD-ROM drives. In “SCSI” the rate of data transmission is fast.
39) How many classes are there for “IP addresses” and what are the ranges?
They are segregated into five classes
- Class A === 0 -126 ( 127 is reserved for loop back)
- Class B ==== 128- 191
- Class C ==== 192-223
- Class D ==== 224-239
- Class E ==== 240-255
40) Explain the term FIXMBR?
FIXMBR it is a repair tool. It repairs the Master boot record of the Partition Boot Sector.
41) Explain the term SID?
SID stands for Security Identifier. Every computer object has a unique ID which is known as SID.
42) What is the difference between incremental backup and differential backup?
Differential backups will select only files that are changed since the last backup.
Incremental backups will select only the data that has changed since the last backup.
Example, On Sunday you do a backup of a 5 text file each of 40 MB. The total backup size will be 200MB
On Monday you change 2 lines in just ONE of the text file.
Under Differential backup, only the changed text file will be backed up. The total backup size will be 40MB
Under Incremental backup, only the data corresponding to the 2 lines will be backed up. The total backup size will be just in bytes.
43) What is the difference between server OS and desktop OS?
Server OS gives centralized administration for users, shared resources and security while desktop OS offers access to only local administration.
44) What is the difference between the MSI file and .EXE file?
MSI (Microsoft Installer) allows install, uninstall and repair the program with a single file, while .EXE file needs two files to install and uninstall the software. Also, .EXE file is able to detect the existing version of the software and give an option to user to uninstall the program while MSI will instruct the users to use the add and remove program in the control panel to remove the existing product first and then you can install the new program.
45) What is BSOD? How do you troubleshoot it?
BSOD stands for the Blue Screen Of Death. When there is some fault in OS or hardware, then Windows can’t run the program and gives a blue screen with a code. To resolve this problem the best way is to reboot the system. If it doesn’t work than boot the system in the safe mode.
46) What is PTR Record?
The PTR record or Pointer record is used to check if the server name is connected with the IP address, it is exactly opposite to the ‘A’ record. This record is basically created in reverse lookup zone, so it is also known as Reverse DNS records or pointer records.
PTR record= Give me an IP address and I will give you the name
‘A’ record= Give me the name and I will give you the IP address
47) What is a reservation?
Basically, the term “Reservation” is used in the DHCP server. Some network equipment or computer system needs a specific IP address, in such case we make a reservation in DHCP server for that particular computer system. By creating reservation, it gives access to that particular IP address and at the same time prevents other computer systems to use that IP address.
48) What is the SMTP server or POP server?
POP stands for post office protocol. It is used for mail receiving purpose in the network.
SMTP stands for simple mail transfer protocol. It is basically used for sending and receiving the mail.
49) What is RIS and why you use RIS?
RIS stands for remote installation services. It is used to install image from a Window server to new hardware. We use RIS because installing the OS every time using a CD would be more time-consuming.
50) What is “Bootloader”?
Bootloader facilitates the loading of the operating system on the system. It enables the booting process and gives the OS option to the users while starting the system.
Thanks :)
Very useful for me.thank u
Thanks a lot
Thanx for sharing very useful questions……………
>!ts_me?
very useful
great effort man, thanks a lot.
impressive
It’s very supportive Question for Interview
Thank you very murch.
difference between incremental backup and differential backup is wrong. Rework that answer…
Error Fixed! Thanks for bringing this to notice
A physical drive can have only 4 logical partitions, and 24 extended partitions.
incremental back up process fast and restoration process slow & complex, archive file backup not taken
differential back up process little bit slow but restoration process fast & simple, archive file backup are taken
‘Archive file backup’ – Are you referring to a full backup? Because neither take a full backup. A full backup takes a full backup.
Only real difference between diff and inc is what point they use as a reference to measure the change in data.
About encryption and description
The grammar of this is a little tough but I appreciate a good starting point. Thanks for the list!
Very educative
Team Thanks for sharing its really very need full. Thanks yo again and all the best keep sharing :)
Super …Very good information it is….
Thank you very much .. Really useful informations up there
Thanks …..
yes it’s very useful for me
Yes it is very useful
Very informative website.
It is very helpful questions & Ans…… Also used all information easy language and understand easily… Thank you so much..
Thanks sir its very supporting for me
it is very helpful question with answer even easy for foreign students I like it very much thank you.
Very helpful and easy to understand… thanks
Thank you
yes
GoodWork
Thanks for your post..
Very useful. thanks alot
too good
good raly i am happy i wnt more very usefull tomee
regards
sravana reddy
Very good question for fresher
Good helpful
It is very help full
What is SMTP server or POP server?
it is wrong concept SMTP :SMTP stands for simple mail transfer protocol. it is used for mail receiving purpose in the network.
POP server
It is basically used for sending and receiving the mail.
Answer Updated!
pop is post office protocol
Updated answer is incorrect. The basic difference between SMTP and POP3 is that SMTP is a message transfer agent used to send the message and POP3 is a message access agent used to receive the message.
Both POP3 and SMTP are protocols for handling your email over the Internet. The difference between them is that the SMTP protocol handles sending new emails, while POP3 takes care of receiving emails.
You are right DJ.
THANK YOU
Thank you very much
very nice ! Thanks….
Thanks for Support.
really its very useful for me. thanq so much
It is very useful for me and thanx for sharing the very useful question
Very useful thanks
Nice…. Very useful
Nice questions and ans
Tnx
This was a refreshing article thank you
So usefull.tq
super ……
good question & answer share
Thanx for sharing very useful questions……………
thanks a lot its so simple to learn ………….
Thank you
Good information, very helpful, Thank you.
Very use full
Thanks
this Question is very useful in interview time
thnx it’s very helpfull question for fresher
thanks for that this is really helpfull for ussss……
Super and thanks
Thanks for sharing. Very useful..
Very useful
Thank you!!!
Very Usefull
Thanks a lot..
ALLAH bless you all.
Very Use full
Thank You
Very nice question and so helpful question for me
thank you for these helpful questins….
Very useful and easy understand
Thanks for sharing very useful Information..and it’s very much useful for me..
what a grate combination of IT question
very -very usefull for me THANKS YOU !!!
Very Very Useful…thanks a lot…
Its very nice questions.
100%
it’s very helpful for me
this is useful important for MANAGEMENT TRAINEE / DESKTOP SUPPORT ENGINEER
Thank you
Thank you very much. Very useful for me to attend interviews and to discuss with our colleagues.
Thanks for sharing
very good of this website
Very resourceful
and Educative and supportive questions for End user device ssupport Administrator in any organization.
Thank you so much.
Very Useful question and answers. Thanks a lot
Is the great to helpful
Very very helpful for fresher Jobs it’s good networking
Excellent questions and answers
thank u
All questions for different interview are important &, good. I need more Valuables questions for preparation to attend the various interview.Overall All questions are good. Technical support associate questions are very well.
Very use full for me
Thanks,
Thankyou so much, it helps a lot.
Thanks Very much
Helpful questions, need explanation in Safe Mode and Boot loader.
Very usefully…kindly send me some networking based usefully questions
Thankyou so much ,,,, :-)
Thanks..it’s useful
I believe 46 is a POINTER record (PTR).
nope
Yes it is Pointer Record (PTR)
Thank you so much for good guide for interview
Thanku Admin :)
Thanks for best support
Question 48
SMTP (Simple Mail Transfer Protocol) is a TCP/IP protocol used in sending and receiving e-mail. … In other words, users typically use a program that uses SMTP for sending e-mail and either POP3 or IMAP for receiving e-mail. On Unix-based systems, sendmail is the most widely-used SMTP server for e-mail.
Very usefull thanks
Very useful ??
Nice Job Sir, I like your work please keep sharing such type information its very useful.
Thanks for your time spent in sharing this information, God Bless You
It is useful question and answer for interview and really life……………….
thank u so much for this
Thanks for your interview tips it wil help me to answer all questions regarding desktop
Thank you so much. very use full .
Nice knowledge
Thank you for the help.
Very Helpful, thank you…
Great Work?
Thank u so much!!
Keep it up.?
It’s most important for me regarding interview thanks everyone when wrote this question with answers
Thnaks ….this is a great information and resources.
Thank u so much?
Thank you so much, I attended an interview where maximum number of questions were asked included in this page,
Some more questions were also asked about ITIL , ITSM ,SCCM etc
Good explanation
It will be very helpful.
Thanks a lot ?.
Great information. Thank you!
good question and answers
Very good guide for preparing for interview
It is very useful .. Thank you so much for sharing the interview questions with answers …..
#8 is only partially correct. You can use a standard LAN cable since most adapters now are auto-sensing.
Its very useful and nicequestions
thank you so much it is very useful for me im studying diploma in networking adminsration
Very useful for freshers. Basic info.to crack an interview. Large amt of info. Tq
Thank you so much sir it is very helpful questions. it is very important for me thats questions.
Program trouble record? Where on earth did you get that idea from?! PTR is an abbreviation for “pointer”, hence it’s a “pointer record”.
It is corrected.
Hi Admin,
Kindly share some questions regarding SSCM admin
Thanks & regard
Adarsh
Thank you?
Thank you
Thank you for helpful questionary!
pop and smtp answer is incorrect..
Thanks for writing. It is updated.
its useful learning those who r interest abt admin side
very usefull thanks
Very nice questions sir please make more questions . Thank you
Very useful.
Thanks a lot
Very useful.thanks
Thanks a lot!!! Defined simply and easily understandable.
1st I said you a Big THANKS….
It’s very useful questions and answers in an understandable simple language.
Very useful information. Thank you so much for sharing.
Thank you sooo much
Too informative for everyone….
Very useful Q sir
Nice sir
Thanks for information of intervew questions answer…
Regards,
Vishnu Sharma
Thanks for information of intervew questions answer…
Good questions send Active directory questions
thanks for this questions and answers
It is very helpfull for all the persons in IT field. And i am very thankful to you.
Thanks for the above information..it will very help for interviews..
Thank you very much, very useful questions and answers for interview
Nice. All are useful questions for Desktop support engineer.
Thanks
Do post more questions regarding active directory and office 365 as well. Overall its a good amount of Q&A. Thanks.
It is too helpful for increasing the knowledge and interview clearance
Regards
Naveen sharma
good
It is very useful for us,to increase our knowledge
ty
Good job.?
Very useful for interview.
Thank u
Very easy to understand… And very useful ?
Very useful for me
thank you very much to the creater helps me a lot in learing for the interview
Add server question and desktop also
Thanks a lot
Very useful thankyou
Very useful questions (thanks)
Easy understanding answers
What a useful information to get ready for the preparation of exams
thank you very uswfull
Very informative and simply described… Thank you so much!
Very useful thank you.
thank you
Thanx a lot career guru . It is very useful questions. thx again.
Awesome!
this is more than a summary of a special books ..
Thank you .
SMTP (“Simple Mail Transfer Protocol”) is used for sending and delivering from a client to a server via port 25: it’s the outgoing server. On the contrary, POP (“Post Office Protocol”) allows the user to pick up the message and download it into his own inbox: it’s the incoming server.
thankyou so much .
add server questions
Thanx for that
It helpful for inteview
It is very useful .thanks
dear career guru team,
thank you very much for your guidance ,
kindly revise question no 48. it answer was reversed .
POP used for mail receiving purpose. only receiving purpose
smtp used for send and receive .
Answer is updated, Thanks
Very Nice Notes desktop support Interview questions and answers.
Thank you so much. useful for my Interview.
Very Helpful module for writing and interview exam preparation